Adblue-emulator til DAF XF105, CF75, CF85 Euro 5

Kabelforbundet adblue emulator til DAF XF105, CF75, CF85 Euro 5 (2007-2013). Fuld fjernelse af SCR & NOx. Monteres på 10-15 minutter, ingen programmering.

1–3: 880 kr. · 4–5: 700 kr. · 6+: 615 kr.

  • Kompatible modeller: DAF XF105, CF75, CF85
  • Årgange: 2007–2013
  • Emulator type: Hard-wired
  • Mærke: Can Logic
  • Garanti: 2 years

Denne enhed erstatter

  • SCR / ECU-styreenhed
  • Adblue-pumpemodul
  • Tryksensor
  • Adblue-niveausensor
  • Temperatursensor
  • NOx før katalysator
  • NOx efter katalysator

Beskrivelse

Vægt: 0.66kg

Mærke: Can Logic

Emulatortype: Kablet

Pengene-tilbage-garanti: 14 days

2 års garanti

Gratis online teknisk support til vores kunder

Professionel Adblue-emulator, vejledning medfølger

Fremstillet med komponenter af højeste kvalitet

Enhedsoplysninger

Produktkode: ME-DXF5-W

Produkttype: Adblue-emulator

Motortype: PACCAR

Kompatibel ECU: EAS2

Emissionsstandard: EURO5

For lastbiler bygget 2007 - 2013

Kompatible modeller: XF105, CF85, CF75

Installation

Step 1: Connecting our Adblue Emulator unit

Open the bonnet and find junction box at the top right corner. Open the box and locate green plug as shown in photo. Pull the plug out to gain easy access to the wires coming into the plug.

Connect the emulator as shown in the second photo. Once connected, make sure to isolate all connections properly. The emulator must be mounted inside the box so that no moisture can get to it.

Emulator wire values:

White – Negative

Red – +24V Positive/Ignition

BLUE – CAN High

Yellow – CAN Low

Step 2: Removing fuses

Locate fuses No. 6 and No. 357 and remove them. This will disable the SCR system entirely.

Once removed, start your vehicle and check if the Adblue level is showing, which would indicate if the emulator is operational.

Relaterede produkter