Adblue-emulator til MAN TGX, TGM, TGS, TGL Euro 6

Adblue emulator til MAN TGX, TGM, TGS, TGL Euro 6 (2014-2021). Fuld fjernelse af SCR & NOx. Monteres på 10-15 minutter, ingen programmering.

1–3: 2.225 kr. · 4–5: 1.780 kr. · 6+: 1.335 kr.

  • Kompatible modeller: MAN TGX, TGM, TGS, TGL
  • Årgange: 2014–2021
  • Emulator type: Plug & Drive
  • Mærke: Can Logic
  • Garanti: 2 years

Denne enhed erstatter

  • SCR / ECU-styreenhed
  • Adblue-pumpemodul
  • Tryksensor
  • Adblue-niveausensor
  • Temperatursensor
  • NOx før katalysator
  • NOx efter katalysator

Beskrivelse

Vægt: 0.66kg

Mærke: Can Logic

Emulatortype: Plug & Drive

Pengene-tilbage-garanti: 14 days

2 års garanti

Gratis online teknisk support til vores kunder

Professionel Adblue-emulator, vejledning medfølger

Fremstillet med komponenter af højeste kvalitet

Enhedsoplysninger

Produktkode: PE-MAN-E6-P

Produkttype: Adblue-emulator

Motortype: MAN

Kompatibel ECU: BOSCH EDC17

Emissionsstandard: EURO 6

MAN Serie: TGS, TGX, TGL, TGM

For lastbiler bygget 2014 - 2021

Kompatible modeller: TGS, TGX, TGL, TGM

Installation

1. Please remove Adblue pump cover and gain access to the adblue pump. This is normally located on the right hand side behind the cab.

2. Disconnect plug from the Adblue pump and plug Can Smart emulator in.

3. Please remove the following fuses:

F894(Multisensor In Adblue tank)

F738 (+30 Signal of Adblue pump)

F1084(NOx sensor Upstream)

F737 is now fuse of emulator.

Fuse F1109 is the fuse for NOx sensor Downstream and fuse A1191 is for muffler temperature sensor. These sensors must be in working condition to enable DPF regeneration.

Lastly, please remove Power from NOx downstream sensor. Cut pin 1 in NOx sensor plug.

Relaterede produkter