Adblue-emulator til Mercedes MP4 All Trucks Euro 6

Kabelforbundet adblue emulator til Mercedes MP4 All Trucks Euro 6 (2014-2021). Fuld fjernelse af SCR, NOx & DPF.

1–3: 2.140 kr. · 4–5: 1.690 kr. · 6+: 1.245 kr.

  • Kompatible modeller: Mercedes MP4 ALL TRUCKS
  • Årgange: 2014–2021
  • Emulator type: Hard-wired
  • Mærke: Can Logic
  • Garanti: 2 years

Beskrivelse

Vægt: 0.66kg

Mærke: Can Logic

Emulatortype: Kablet

Pengene-tilbage-garanti: 14 days

2 års garanti

Gratis online teknisk support til vores kunder

Professionel Adblue-emulator, vejledning medfølger

Fremstillet med komponenter af højeste kvalitet

Enhedsoplysninger

Produktkode: ME-MP4-E6-W

Produkttype: Adblue-emulator

Motortype: MERCEDES

Kompatibel ECU: ACM

MB Serie: 4 series (MP4)

Emissionsstandard: EURO 6

For lastbiler bygget 2014 - 2021

Kompatible modeller: ACTROS, ANTOS, ATEGO, AROCS, ECONIC

Installation

Installation Instruction for Emulator Connection

Step 1: Prepare the Vehicle

1. Turn off the ignition.

2. Open the bonnet and locate the wiring compartment.

3. Remove the lid to access the wires.

Step 2: CAN Line Connection

1. Find the wires as shown in the picture.

2. Connect the emulator to the following wires according to the color coding:

• Blue – CAN High

• White – CAN Low

Step 3: Power Connection

1. Connect the power wires as follows:

• Brown – Negative (-)

• Red – +24V Positive/Ignition

1. Locate and remove the white plug, which is in the lower left corner.

2. Cut the black/green wire and connect the end going into the plug to the red wire from the emulator.

3. Reinsert the plug back into its position.

Step 5: Final Check

1. Once all connections are made, turn on the ignition.

2. Check the Adblue level on the dashboard – it should display around 30%.

The installation is now complete!

Relaterede produkter