Adblue-emulator til Renault All Trucks Euro 5

Kabelforbundet adblue emulator til Renault All Trucks Euro 5 (2007-2013). Fuld fjernelse af SCR & NOx. Monteres på 10-15 minutter, ingen programmering.

1–3: 880 kr. · 4–5: 710 kr. · 6+: 615 kr.

  • Kompatible modeller: Renault ALL TRUCKS
  • Årgange: 2007–2013
  • Emulator type: Hard-wired
  • Mærke: Can Logic
  • Garanti: 2 years

Denne enhed erstatter

  • SCR / ECU-styreenhed
  • Adblue-pumpemodul
  • Tryksensor
  • Adblue-niveausensor
  • Temperatursensor
  • NOx før katalysator
  • NOx efter katalysator

Beskrivelse

Vægt: 0.66kg

Mærke: Can Logic

Emulatortype: Kablet

Pengene-tilbage-garanti: 14 days

2 års garanti

Gratis online teknisk support til vores kunder

Professionel Adblue-emulator, vejledning medfølger

Fremstillet med komponenter af højeste kvalitet

Enhedsoplysninger

Produktkode: ME-R3-E5-W

Produkttype: Adblue-emulator

Motortype: RENAULT

Kompatibel ECU: EMS

RENAULT Serie: 3 series

Emissionsstandard: EURO5

For lastbiler bygget 2007 - 2013

Kompatible modeller: PREMIUM, MIDLUM, MAGNUM, KARREX, DCi

Installation

Step 1: Connecting Can Smart Adblue Emulator

Take off plastic dashboard cover and find OBD II socket located next to fuse board. Remove the screw holding OBD socket in place so that you can release OBD socket and pull it slightly toward you to gain access to the wires coming into OBD socket.

Can Smart emulator wire values:

Brown – Negative

Red – +24V Positive

Blue – CAN High

Green – CAN Low

Connect emulator as per photo:

Once connected, please make sure you isolate all connections properly and mount the emulator to minimise vibration and risk of water/moisture damage.

Step 2: Removing fuses

Locate the P59 fuse and remove it. This will disable the SCR system entirely.

Once removed, start your vehicle and check if the Adblue level is showing, which would indicate that the emulator is operational.

Relaterede produkter