Adblue emulators modeļiem Mercedes MP4 All Trucks Euro 6

Vadu Adblue emulators Mercedes MP4 All Trucks Euro 6 (2014-2021). Pilnīga SCR, NOx un DPF atspējošana. Uzstādāms 10-15 minūtēs, bez programmēšanas.

1–3: €285 · 4–5: €225 · 6+: €165

  • Saderīgie modeļi: Mercedes MP4 ALL TRUCKS
  • Izlaiduma gadi: 2014–2021
  • Emulatora tips: Hard-wired
  • Zīmols: Can Logic
  • Garantija: 2 years

Apraksts

Svars: 0.66kg

Zīmols: Can Logic

Emulatora tips: Vadu

Naudas atmaksas garantija: 14 days

2 gadu garantija

Bezmaksas tiešsaistes tehniskais atbalsts mūsu klientiem

Profesionāls Adblue emulators, instrukcijas pievienotas

Ražots no augstākās kvalitātes auto rūpniecības komponentiem

Ierīces informācija

Produkta kods: ME-MP4-E6-W

Produkta tips: Adblue emulators

Motora tips: MERCEDES

Saderīga ECU: ACM

MB Sērija: 4 series (MP4)

Emisiju standarts: EURO 6

Kravas auto, ražoti 2014 - 2021

Saderīgi modeļi: ACTROS, ANTOS, ATEGO, AROCS, ECONIC

Uzstādīšana

Installation Instruction for Emulator Connection

Step 1: Prepare the Vehicle

1. Turn off the ignition.

2. Open the bonnet and locate the wiring compartment.

3. Remove the lid to access the wires.

Step 2: CAN Line Connection

1. Find the wires as shown in the picture.

2. Connect the emulator to the following wires according to the color coding:

• Blue – CAN High

• White – CAN Low

Step 3: Power Connection

1. Connect the power wires as follows:

• Brown – Negative (-)

• Red – +24V Positive/Ignition

1. Locate and remove the white plug, which is in the lower left corner.

2. Cut the black/green wire and connect the end going into the plug to the red wire from the emulator.

3. Reinsert the plug back into its position.

Step 5: Final Check

1. Once all connections are made, turn on the ignition.

2. Check the Adblue level on the dashboard – it should display around 30%.

The installation is now complete!

Saistītie produkti