Adblue Emulator voor Renault D Euro 6

Bedrade adblue emulator voor Renault D Euro 6 (2014-2021). Volledige SCR-, NOx- en DPF-uitschakeling. Geplaatst in 10-15 minuten, zonder programmeren.

1–3: €295 · 4–5: €235 · 6+: €175

  • Compatibele modellen: Renault D
  • Bouwjaren: 2014–2021
  • Emulatortype: Hard-wired
  • Merk: Can Logic
  • Garantie: 2 years

Beschrijving

Gewicht: 0.66kg

Merk: Can Logic

Type emulator: Bedraad

Geld-terug-garantie: 14 days

2 jaar garantie

Gratis online technische ondersteuning voor onze klanten

Professionele Adblue-emulator, handleiding meegeleverd

Vervaardigd uit hoogwaardige automotive componenten

Apparaatinformatie

Productcode: ME-RD-E6-W

Producttype: Adblue-emulator

Motortype: RENAULT

Compatibele ECU: EMS

RENAULT Serie: 4 series

Emissienorm: EURO6

Voor vrachtwagens uit 2014 - 2021

Compatibele modellen: D range

Installatie

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug)

Power connections:

BROWN wire from emulator connect to - PIN 58 (-Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - Cut wires PIN1 and PIN5 and connect the emulator to the wires going toward the truck, not to the ends that goes into the plug.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconnect NOx sensor. To do this please cut wire from PIN 49 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Gerelateerde producten