Emulador de Adblue para Renault T, K, C Euro 6

Emulador Adblue (retarder) para Renault T, K, C Euro 6 (2014-2021). Desativação total de SCR, NOx e DPF. Instala-se em 10-15 minutos, sem programação.

1–3: €320 · 4–5: €260 · 6+: €200

  • Modelos compatíveis: Renault T, K, C
  • Intervalo de anos: 2014–2021
  • Tipo de emulador: Hard-wired
  • Marca: Can Logic
  • Garantia: 2 years

Descrição

Peso: 0.66kg

Marca: Can Logic

Tipo de emulador: Com fios

Garantia de devolução: 14 days

2 anos de garantia

Suporte técnico online gratuito para os nossos clientes

Emulador Adblue profissional, instruções incluídas

Fabricado com componentes de qualidade automotiva superior

Informações do dispositivo

Código do produto: ME-RT-E6-RW

Tipo de produto: Emulador Adblue

Tipo de motor: RENAULT

ECU compatível: EMS

VOLVO Série: 4 series

Norma de emissões: EURO6

Para camiões fabricados 2014 - 2021

Modelos compatíveis: T, K, C RETARDER Models

Instalação

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug)

Power connections:

BROWN wire from emulator connect to - PIN 58 (-Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - Cut wires PIN1 and PIN5 and connect the emulator to the wires going toward the truck, not to the ends that goes into the plug.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconnect NOx sensor. To do this please cut wire from PIN 49 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Produtos relacionados