Adblue-emulator til Volvo FH5, FM5, FMX5 Euro 6

Kabelforbundet adblue emulator til Volvo FH5, FM5, FMX5 Euro 6 (2022-2024). Fuld fjernelse af SCR, NOx & DPF. Monteres på 10-15 minutter, ingen programmering.

1–3: 2.225 kr. · 4–5: 1.780 kr. · 6+: 1.335 kr.

  • Kompatible modeller: Volvo VOLVO FH5, FM5, FMX5
  • Årgange: 2022–2024
  • Emulator type: Hard-wired
  • Mærke: Can Logic
  • Garanti: 2 years

Beskrivelse

Vægt: 0.03kg

Mærke: Can Logic

Emulatortype: Kablet

Pengene-tilbage-garanti: 14 days

2 års garanti

Gratis online teknisk support til vores kunder

Professionel Adblue-emulator, vejledning medfølger

Fremstillet med komponenter af højeste kvalitet

Enhedsoplysninger

Produktkode: RE-FE4-E6-W

Produkttype: Adblue-emulator

Motortype: VOLVO

Kompatibel ECU: EMS

VOLVO Serie: 4 series

Emissionsstandard: EURO6

For lastbiler bygget 2014 - 2021

Kompatible modeller: FE, FL

Installation

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug) Power connections:

BROWN wire from emulator connect to - PIN 58 (- Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - DO NOT cut these wires, Connect the wires in parallel.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconncect ACM ECU

To do this please cut wire from PIN 3 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Relaterede produkter