Adblue-Emulator für Volvo FH5, FM5, FMX5 Euro 6

Verkabelter Adblue-Emulator für Volvo FH5, FM5, FMX5 Euro 6 (2022-2024). Komplette SCR-, NOx- & DPF-Deaktivierung. Einbau in 10-15 Minuten, ohne Programmierung.

1–3: €295 · 4–5: €235 · 6+: €175

  • Kompatible Modelle: Volvo VOLVO FH5, FM5, FMX5
  • Baujahre: 2022–2024
  • Emulatortyp: Hard-wired
  • Marke: Can Logic
  • Garantie: 2 years

Beschreibung

Gewicht: 0.03kg

Marke: Can Logic

Emulator-Typ: Verkabelt

Geld-zurück-Garantie: 14 days

2 Jahre Garantie

Kostenloser technischer Online-Support für unsere Kunden

Professioneller Adblue-Emulator, Anleitung im Lieferumfang

Hergestellt aus hochwertigsten Automotive-Komponenten

Geräteinformationen

Produktcode: RE-FE4-E6-W

Produkttyp: Adblue-Emulator

Motortyp: VOLVO

Kompatibles Steuergerät: EMS

VOLVO Serie: 4 series

Abgasnorm: EURO6

Für LKW Baujahr 2014 - 2021

Kompatible Modelle: FE, FL

Installation

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug) Power connections:

BROWN wire from emulator connect to - PIN 58 (- Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - DO NOT cut these wires, Connect the wires in parallel.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconncect ACM ECU

To do this please cut wire from PIN 3 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Ähnliche Produkte