Émulateur Adblue pour Volvo FH4, FM4, FMX4 Euro 6

Adblue émulateur filaire pour Volvo FH4, FM4, FMX4 Euro 6 (2014-2021). Suppression totale SCR, NOx et DPF. S'installe en 10-15 minutes, sans programmation.

1–3: €295 · 4–5: €235 · 6+: €175

  • Modèles compatibles: Volvo FH4, FM4, FMX4
  • Plage d'années: 2014–2021
  • Type d'émulateur: Hard-wired
  • Marque: Can Logic
  • Garantie: 2 years

Description

Poids: 0.03kg

Marque: Can Logic

Type d'émulateur: Câblé

Garantie satisfait ou remboursé: 14 days

Garantie 2 ans

Support technique en ligne gratuit pour nos clients

Émulateur Adblue professionnel, notice fournie

Fabriqué avec des composants automobiles de la plus haute qualité

Informations sur l'appareil

Code produit: ME-FH4-E6-W

Type de produit: Émulateur Adblue

Type de moteur: VOLVO

ECU compatible: EMS

VOLVO Série: 4 series

Norme d'émissions: EURO 6

Pour camions construits 2014 - 2021

Modèles compatibles: FH4, FM4, FMX4

Installation

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug) Power connections:

BROWN wire from emulator connect to - PIN 58 (- Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - DO NOT cut these wires, Connect the wires in parallel.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconncect ACM ECU

To do this please cut wire from PIN 3 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Produits associés