Adblue Emulator for MAN TGX, TGM, TGS, TGL Euro 5

Wired adblue emulator for MAN TGX, TGM, TGS, TGL Euro 5 (2007-2013). Full SCR & NOx delete. Premium quality, waterproof. Fits in 10-15 minutes, no programming.

1–3: £99 · 4–5: £80 · 6+: £69

  • Compatible models: MAN TGX, TGM, TGS, TGL
  • Year range: 2007–2013
  • Emulator type: Hard-wired
  • Brand: Can Logic
  • Warranty: 2 years

This device replaces

  • SCR / ECU control unit
  • Adblue pump module
  • Pressure sensor
  • Adblue level sensor
  • Temperature sensor
  • NOx before catalyst
  • NOx after catalyst

Description

Weight: 0.66kg

Brand: Can Logic

Emulator type: Hard-wired

Money Back Guarantee: 14 days

2 Year warranty

Free technical support online for our customers

Professional Adblue emulator, instructions supplied

Manufactured using highest quality automotive grade components

Device information

Product code: ME-MAN-E5-W

Product type: Adblue Emulator

Engine type: MAN

Compatible ECU: BOSCH EDC7

VOLVO Series: 3 series

Emissions standard: EURO5

For trucks manufactured 2007 - 2013

Compatible Models: TGS, TGX, TGL, TGM

Installation

Step 1: Wiring the emulator

1. Turn off the ignition.

2. Open the bonnet of the vehicle and find the wiring compartment on the right side. Gain access to the wires by removing the lid.

3. Find the wires shown on the picture. Connect the emulator to those wires by referring to the colour coding below:

Brown – Negative

Red – +24V Positive/Ignition

Yellow – CAN High

Green – CAN Low

Step 2: Disabling the SCR system

There are two ways to disable the SCR system:

1. Remove the 737, 738 and 864 fuses from the fusebox of the vehicle.

Once that is done, start the vehicle to check if the Adblue levels are showing, which should indicate if the emulator is operational or not.

Related products