Emulador de Adblue para Volvo FH4, FM4, FMX4 Euro 6

Adblue emulador (retarder) para Volvo FH4, FM4, FMX4 Euro 6 (2014-2021). Anulación total de SCR, NOx y DPF. Se instala en 10-15 minutos, sin programación.

1–3: €320 · 4–5: €260 · 6+: €200

  • Modelos compatibles: Volvo FH4, FM4, FMX4
  • Años de fabricación: 2014–2021
  • Tipo de emulador: Hard-wired
  • Marca: Can Logic
  • Garantía: 2 years

Descripción

Peso: 0.03kg

Marca: Can Logic

Tipo de emulador: Cableado

Garantía de devolución: 14 days

2 años de garantía

Soporte técnico en línea gratuito para nuestros clientes

Emulador Adblue profesional, instrucciones incluidas

Fabricado con componentes de calidad automotriz superior

Información del dispositivo

Código de producto: ME-FH4-E6-W

Tipo de producto: Emulador Adblue

Tipo de motor: VOLVO

ECU compatible: EMS

Serie: 4 series, RETARDER MODELS

Norma de emisiones: EURO 6

Para camiones fabricados 2014 - 2021

Modelos compatibles: FH, FM, FMX

Instalación

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug)

Power connections:

BROWN wire from emulator connect to - PIN 58 (-Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - Cut wires PIN1 and PIN5 and connect the emulator to the wires going toward the truck, not to the ends that goes into the plug.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconnect NOx sensor. To do this please cut wire from PIN 49 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Productos relacionados