Emulador de Adblue para Volvo FH4, FM4, FMX4 Euro 6

Adblue emulador con cable para Volvo FH4, FM4, FMX4 Euro 6 (2014-2021). Anulación total de SCR, NOx y DPF. Se instala en 10-15 minutos, sin programación.

1–3: €295 · 4–5: €235 · 6+: €175

  • Modelos compatibles: Volvo FH4, FM4, FMX4
  • Años de fabricación: 2014–2021
  • Tipo de emulador: Hard-wired
  • Marca: Can Logic
  • Garantía: 2 years

Descripción

Peso: 0.03kg

Marca: Can Logic

Tipo de emulador: Cableado

Garantía de devolución: 14 days

2 años de garantía

Soporte técnico en línea gratuito para nuestros clientes

Emulador Adblue profesional, instrucciones incluidas

Fabricado con componentes de calidad automotriz superior

Información del dispositivo

Código de producto: ME-FH4-E6-W

Tipo de producto: Emulador Adblue

Tipo de motor: VOLVO

ECU compatible: EMS

VOLVO Serie: 4 series

Norma de emisiones: EURO 6

Para camiones fabricados 2014 - 2021

Modelos compatibles: FH4, FM4, FMX4

Instalación

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug) Power connections:

BROWN wire from emulator connect to - PIN 58 (- Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - DO NOT cut these wires, Connect the wires in parallel.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconncect ACM ECU

To do this please cut wire from PIN 3 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Productos relacionados