Adblue emulators modeļiem Volvo FH4, FM4, FMX4 Euro 6

Adblue emulators (retarder) Volvo FH4, FM4, FMX4 Euro 6 (2014-2021). Pilnīga SCR, NOx un DPF atspējošana. Uzstādāms 10-15 minūtēs, bez programmēšanas.

1–3: €320 · 4–5: €260 · 6+: €200

  • Saderīgie modeļi: Volvo FH4, FM4, FMX4
  • Izlaiduma gadi: 2014–2021
  • Emulatora tips: Hard-wired
  • Zīmols: Can Logic
  • Garantija: 2 years

Apraksts

Svars: 0.03kg

Zīmols: Can Logic

Emulatora tips: Vadu

Naudas atmaksas garantija: 14 days

2 gadu garantija

Bezmaksas tiešsaistes tehniskais atbalsts mūsu klientiem

Profesionāls Adblue emulators, instrukcijas pievienotas

Ražots no augstākās kvalitātes auto rūpniecības komponentiem

Ierīces informācija

Produkta kods: ME-FH4-E6-W

Produkta tips: Adblue emulators

Motora tips: VOLVO

Saderīga ECU: EMS

Sērija: 4 series, RETARDER MODELS

Emisiju standarts: EURO 6

Kravas auto, ražoti 2014 - 2021

Saderīgi modeļi: FH, FM, FMX

Uzstādīšana

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug)

Power connections:

BROWN wire from emulator connect to - PIN 58 (-Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - Cut wires PIN1 and PIN5 and connect the emulator to the wires going toward the truck, not to the ends that goes into the plug.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconnect NOx sensor. To do this please cut wire from PIN 49 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Saistītie produkti