Adblue emulators modeļiem Volvo FH4, FM4, FMX4 Euro 6

Vadu Adblue emulators Volvo FH4, FM4, FMX4 Euro 6 (2014-2021). Pilnīga SCR, NOx un DPF atspējošana. Uzstādāms 10-15 minūtēs, bez programmēšanas.

1–3: €295 · 4–5: €235 · 6+: €175

  • Saderīgie modeļi: Volvo FH4, FM4, FMX4
  • Izlaiduma gadi: 2014–2021
  • Emulatora tips: Hard-wired
  • Zīmols: Can Logic
  • Garantija: 2 years

Apraksts

Svars: 0.03kg

Zīmols: Can Logic

Emulatora tips: Vadu

Naudas atmaksas garantija: 14 days

2 gadu garantija

Bezmaksas tiešsaistes tehniskais atbalsts mūsu klientiem

Profesionāls Adblue emulators, instrukcijas pievienotas

Ražots no augstākās kvalitātes auto rūpniecības komponentiem

Ierīces informācija

Produkta kods: ME-FH4-E6-W

Produkta tips: Adblue emulators

Motora tips: VOLVO

Saderīga ECU: EMS

VOLVO Sērija: 4 series

Emisiju standarts: EURO 6

Kravas auto, ražoti 2014 - 2021

Saderīgi modeļi: FH4, FM4, FMX4

Uzstādīšana

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug) Power connections:

BROWN wire from emulator connect to - PIN 58 (- Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - DO NOT cut these wires, Connect the wires in parallel.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconncect ACM ECU

To do this please cut wire from PIN 3 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Saistītie produkti