Adblue Emulator for Volvo FH4, FM4, FMX4 Euro 6

Wired adblue emulator for Volvo FH4, FM4, FMX4 Euro 6 (2014-2021). Full SCR, NOx & DPF delete. Fits in 10-15 minutes, no programming.

1–3: £250 · 4–5: £200 · 6+: £150

  • Compatible models: Volvo FH4, FM4, FMX4
  • Year range: 2014–2021
  • Emulator type: Hard-wired
  • Brand: Can Logic
  • Warranty: 2 years

Description

Weight: 0.03kg

Brand: Can Logic

Emulator type: Hard-wired

Money Back Guarantee: 14 days

2 Year warranty

Free technical support online for our customers

Professional Adblue emulator, instructions supplied

Manufactured using highest quality automotive grade components

Device information

Product code: ME-FH4-E6-W

Product type: Adblue Emulator

Engine type: VOLVO

Compatible ECU: EMS

VOLVO Series: 4 series

Emissions standard: EURO 6

For trucks manufactured 2014 - 2021

Compatible Models: FH4, FM4, FMX4

Installation

Step one:

Emulator is to be connected to the ACM plug. Please find ACM module (this is located right hand side of the frame) Remove/unplug ACM plug.

Step two:

Please connect emulator as shown below. (connect to wires from ACM plug) Power connections:

BROWN wire from emulator connect to - PIN 58 (- Negative)

RED wire from emulator connect to- PIN 60 (+ Positive/power)

CAN LINE Connections:

CAN 1 - DO NOT cut these wires, Connect the wires in parallel.

WHITE wire from emulator connect to PIN1

BLUE wire from emulator connect to PIN5

CAN 2 - DO NOT cut these wires, Connect the wires in parallel.

GREEN wire from emulator connect to PIN10

YELLOW wire from emulator connect to PIN14

Step three:

Please disconncect ACM ECU

To do this please cut wire from PIN 3 and isolate the ends.

Step four:

Once emulator has been installed turn ignition on and check Adblue level gauge is showing, this would indicate installation has been successful.

Related products